Wixey WR300 Digital Angle Gauge Manuel d'utilisateur télécharger pdf

INSTRUCTIONS

1. Set the gauge flat on a reference surface such as a table saw, miter saw, or jointer

table. On a band saw, the blade will be the reference surface.

2. Turn ON and press the ZERO to set the gauge to 0.0 degrees which calibrates the

reference surface. (see

Figure 1

)

3. Attach to the saw blade or jointer fence using the imbedded magnets. (see

Figure 2

)

The gauge should always be kept perpendicular to the table for all measurements.

(see

Figure 3

)

4. A properly adjusted saw blade, jointer fence or band saw table will display

90.0 degrees. If the reading is off, re-adjust your machine following the

manufacturers instructions. (see

Figure 4

)

5. Now you can press ZERO to set the gauge to 0.0 degrees and measure the

angle of your saw blade, jointer fence or band saw table. (see

Figure 5 & 6

)

6. Replace the battery by rotating the cover on the back of the gauge counter

clockwise. (see

Figure 7

)

For questions, comments, or to view our other products go to: http://www.wixey.com

OPEN

Figure 5 Figure 6 Figure 7

Figure 1

Figure 2

Figure 4

Figure 3

Imbedded

Disk Magnets

Keep the gauge perpendicular

to the table

Always turn off and unplug power tools

before using the digital angle gauge

Never use your power tools without properly

installed blade guards. The guards are not

shown in our instructions only to make the

illustrations clear.

SAFETY FIRST

Wixey

Digital Angle Gauge Model WR 300

Résumé du contenu

Page 1

INSTRUCTIONS1. Set the gauge flat on a reference surface such as a table saw, miter saw, or jointer table. On a band saw, the blade will be the

Commentaires sur ces manuels

Pas de commentaire

Wixey WR300 Digital Angle Gauge Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Outils Wixey WR300 Digital Angle Gauge. Wixey WR300 Digital Angle Gauge User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Wixey WR300 Digital Angle Gauge